Palisade and naturals walls

[BruThoL]

No way to make the last wall for the palisade to stick with the natural wall.
And it's possible to enter the village by the hole.

How to close our village from this?

[Kaios]

Try using shift + click placement to put a new cornerpost in that spot. If you cannot do this then you are out of luck and won't be able to extend the wall in to that spot.

[BruThoL]

it doesn't work.
But why can we plow, and lay stone, if we cannot build?

[Kaios]

Your character can fit in the space, and so can a plow. You just can't extend a wall or place a cornerpost there because of the ledge.

[MagicManICT]

I'm trying to think of some way you could seal that off without leaving a gap....

My first thought was to take out the last section of wall and then build a CP there and if need be a wall section, but that wouldn't work, as you'd be stuck not being able to build a wall section and still have an open area others could walk.

What should work is if you pave a spot in front of or behind and stick a CP there. If you place it right, it should seal the whole thing off.

Example: (o-open ground, X- wall, R-ridge, C-CP)

Code: Select all

Rooooo
RoXXXXCGGCXX
RCoooo
Rooooo


Try it and see. Placing the CP behind the wall in the same manner should work.

[BruThoL]

i can't build anything close to this ridge in fact.
Not even some fire...
So i think ill do as follow :

ROOOOO
ROOOOO
ROOOOO
ROCXXXCGGC...
ROXOOO
ROXOOO
RXCOOO

On this spot X (corner of the ridge) i could built fire, so hope i'll be able to build wall too.

Now waiting for ram glue to dry, will post final screen here.