Acre Clay

[Wilim]

Hi!

I have one problem with acre clay. When I'm digging it, it always gives me 1 "piece" of clay. When I'm starting to dig again, it gives me nothin. Should it be like that?

[Amanda44]

Yes, unless you find a clay 'node' you will only get one piece of clay, whichever type it is. Try moving around and digging in different places on the mudflat, not all mudflats will have nodes.

Good luck.

[MagicManICT]

Odds are, unless it's a really large mud flat, digging once at about the center will usually give you an indicator of a node. There's a chance the node is centered off the flat and only catches the edges, but for other than digging for wall bricks, you're not going to want to use that clay for anything. Larger flats should be checked at top, bottom, left, and right.

[longfeather]

Also note: if you turn on the Red Map Grid in the Enders or Apoc or other custom clients. The nodes will peak around areas where these lines cross.

[Amanda44]

Actually, Xcom did a bit on clay nodes in the following link.

viewtopic.php?f=2&t=35295&p=465707&hilit=clay+nodes#p465707

@ Wilim, just scroll down and you'll find it, lots of other info in there you'll also find useful.