Useing a battering ram, 4 people involved but with low strength (31+27+21+12), how long would it take to break through the palisade? (after 24hs required for glue to dry)
"You will need at least 121 strength to damage it with a battering ram. (81 with a pickaxe)". That strength is it the raw attribute or may be it is affected by tools or any other factor?
-
xweetok59
- Posts: 781
- Joined: Thu Jul 15, 2010 8:36 am
Re: How long would take breaching a palisade?
As long as you guys don't equip pickaxe, you won't damage the palisade. If u guys have pickaxes, it will take a long time AFAIK...laudano wrote:Useing a battering ram, 4 people involved but with low strength (31+27+21+12), how long would it take to break through the palisade? (after 24hs required for glue to dry)
"You will need at least 121 strength to damage it with a battering ram. (81 with a pickaxe)". That strength is it the raw attribute or may be it is affected by tools or any other factor?
-
Oddity
- Posts: 1983
- Joined: Sun Jun 20, 2010 12:04 am
- Location: BC, Canadia
Re: How long would take breaching a palisade?
loftar says pickaxes don't work on the battering ram.
Your damage is the square-root of your strength and you need 11 damage total on the battering ram to deal 1 damage to palisade.
The sum of the sqrt's of your guys' strength is 17, so you can certainly deal damage to a palisade with those 4 people. I estimate it will take you like 5-15 minutes to destroy a segment on the ram. Just disregard xweetard.
Your damage is the square-root of your strength and you need 11 damage total on the battering ram to deal 1 damage to palisade.
The sum of the sqrt's of your guys' strength is 17, so you can certainly deal damage to a palisade with those 4 people. I estimate it will take you like 5-15 minutes to destroy a segment on the ram. Just disregard xweetard.
jadamkaz wrote:ah i remember my run in with odditown they are good ppl im sure the only reason they killed ME is because they are troll hunters and i was a troll
-
xweetok59
- Posts: 781
- Joined: Thu Jul 15, 2010 8:36 am
Re: How long would take breaching a palisade?
So, you are saying 5-15 minutes for 1 segment isn't long, Oddytard?Oddity wrote:loftar says pickaxes don't work on the battering ram.
Your damage is the square-root of your strength and you need 11 damage total on the battering ram to deal 1 damage to palisade.
The sum of the sqrt's of your guys' strength is 17, so you can certainly deal damage to a palisade with those 4 people. I estimate it will take you like 5-15 minutes to destroy a segment on the ram. Just disregard xweetard.
-
Dataslycer
- Posts: 1420
- Joined: Sat Jan 30, 2010 5:06 am
Re: How long would take breaching a palisade?
31+27+21+12
5 + 5 + 4 + 3 + 20 (ram) = 37 damage - 30 soak = 7 damage per chop.
2500 / 7 = 357.14285714285714285714285714286 = 358 chops. Each chop is 1 second. Accounting for water breaks, 15 minutes should be relatively accurate.
5 + 5 + 4 + 3 + 20 (ram) = 37 damage - 30 soak = 7 damage per chop.
2500 / 7 = 357.14285714285714285714285714286 = 358 chops. Each chop is 1 second. Accounting for water breaks, 15 minutes should be relatively accurate.
If you keep focusing on the shadow behind, you will not see the light in front of you.
Being successful isn't just about hard work and succeeding, it is also about picking yourself up when you fail.
Being successful isn't just about hard work and succeeding, it is also about picking yourself up when you fail.
