"Clearance" in mines?

Ask, answer and discuss any and all topics about the hows, whys, wheres and whens of playing Haven & Hearth.
User avatar
Zeronine
Posts: 101
Joined: Sun Apr 10, 2011 8:26 pm

"Clearance" in mines?

Post by Zeronine »

I'd like to make a palisade in a cave, ranging from one wall to another, but as soon as I start to pave any tiles x-tiles away from the walls, I get the message that I'm lacking cleareance, what is this? (I've found the spot far away from the entrance where I'm eligible to dig into the walls by the way). My knowledge of caves is lacking.
User avatar
Sevenless
Posts: 7704
Joined: Fri Mar 04, 2011 3:55 am
Location: Canada

Re: "Clearance" in mines?

Post by Sevenless »

You can build a palisade on any mined tile. You cannot start a building within 2 tiles of any cave wall, but if you start it on a mined tile it's my impression you can extend it into the center of the cave.
Lucky: haven is so quirky
Lucky: can be so ugly, can be so heartwarming
Sevenless: it is life

The Art of Herding
W16 Farmer's Almanac
W16 Casting Rod Cheatsheet
Explanation of the logic behind the cooking system
User avatar
MagicManICT
Posts: 18435
Joined: Tue Aug 17, 2010 1:47 am

Re: "Clearance" in mines?

Post by MagicManICT »

Sevenless wrote:You can build a palisade on any mined tile. You cannot start a building within 2 tiles of any cave wall, but if you start it on a mined tile it's my impression you can extend it into the center of the cave.
If you build it purely on mined tiles, you don't have to worry about clearance at all. The issue is when you want to build anything on natural cave floor.

OP: What's the purpose of the palisade? Wall off a section for an underground village? Wall off a cave entrance? Other?

You must mine out the sections so that you can build across natural cave floor in the 'restricted clearance' areas. Just remember that if you can mine there, so can anyone else, so plan accordingly.

Kind of going on a bit of a tangent here: I'm not sure why this is still in the game. Back in w3 and earlier I can see it as a method to prevent anyone from "blocking" a cave with buildings, etc. However, with the ability to mine out around any constructions (except near a cave entrance), does it really serve a purpose now?
Opinions expressed in this statement are the authors alone and in no way reflect on the game development values of the actual developers.
User avatar
Saphireking65
Posts: 856
Joined: Tue Feb 22, 2011 5:35 pm
Location: Stormwind

Re: "Clearance" in mines?

Post by Saphireking65 »

Honestly it is more of a hindrance. We got a brick wall in our cave against the unbuildable zone, but it's very awkward. Still, it get's the job done.
Jackard wrote:
Sotsa wrote:I'm sad to see a wizard has shrunk your cabin and put it in a bottle.
better luck next time.
fucking wizards
andrath
Posts: 2
Joined: Wed Jan 05, 2011 6:30 pm

Re: "Clearance" in mines?

Post by andrath »

While we're at it, can you build a palisade or brick wall piece (i.e. not a cornerpost) on a non-paved cave tile?
User avatar
Saphireking65
Posts: 856
Joined: Tue Feb 22, 2011 5:35 pm
Location: Stormwind

Re: "Clearance" in mines?

Post by Saphireking65 »

No, walls must be built on paved tiles.
Jackard wrote:
Sotsa wrote:I'm sad to see a wizard has shrunk your cabin and put it in a bottle.
better luck next time.
fucking wizards

Return to “How do I?”