Mining

Ask, answer and discuss any and all topics about the hows, whys, wheres and whens of playing Haven & Hearth.
Procne
Posts: 984
Joined: Sat May 29, 2010 3:04 pm

Re: Mining

Post by Procne »

You can get stone of quality higher than 10 by digging in the mountain. Quality nodes for rocks are rare, but they happen sometimes.
Also, if you live in the northern / northeastern part of the map I could provide you with some ql 50 stone axe and maybe bear talisman.

Also, changing your beliefs towards barbarism will increase your strength
User avatar
Nferno44
Posts: 50
Joined: Wed Nov 10, 2010 5:19 pm

Re: Mining

Post by Nferno44 »

1.dig that mountain and find a high q stone node
2.the survival skill determines the quality!
3.try to find a high q tree near a village or so
4.hunt a bear and make yourself a bear cape and a talisman (adds roughly another 45 STR) 30 marksmanship and a q10 sling is enough
5.never build your minehole on a iron node (personal opinion: iron is often coverd in hard stone which is difficult to mine for beginners.)
6.searching for TIN and COOPER is a great start (tin + cooper= bronze which unlocks all the stuff like: pickaxe, miners helmet etc)
7.prospect for nodes on the surface or dig into one direction until you find something.
8.corkscrew to prevent cave-ins! (everything above 1x3 will most-likely cause a cave in)
Image
9. continue hunting boars and bears or make a pumpkin farm to raise your STR.

hope these are some helpfull tips :D
Procne
Posts: 984
Joined: Sat May 29, 2010 3:04 pm

Re: Mining

Post by Procne »

this zig-zag in upper part of the screen may cause cave-ins. Only the snake in the lower part is safe
User avatar
TheTylerLee
Posts: 1604
Joined: Thu Jul 21, 2011 6:00 am

Re: Mining

Post by TheTylerLee »

can 1 cave in kill you

Example:

hey ima go mine, Mine 1 rock, cave in, Dead
Game over
Discord: XiliX#2791
Procne
Posts: 984
Joined: Sat May 29, 2010 3:04 pm

Re: Mining

Post by Procne »

Depends on the amount of your HHP, mine level and amount of boulders in the area.
If I'm not mistaken, the amount of damage done is:
50 * cave level * amount of boulders nearby

if this is bigger than your HHP then you die
User avatar
MagicManICT
Posts: 18435
Joined: Tue Aug 17, 2010 1:47 am

Re: Mining

Post by MagicManICT »

Procne wrote:Depends on the amount of your HHP, mine level and amount of boulders in the area.
If I'm not mistaken, the amount of damage done is:
50 * cave level * amount of boulders nearby

if this is bigger than your HHP then you die
It's 50 * cave level for each hit. It can be a random number of hits, though. From the experience I've had, the more mined out an area is, the more likely multiple hits occur.
Opinions expressed in this statement are the authors alone and in no way reflect on the game development values of the actual developers.
ogw677
Posts: 1
Joined: Sat Jun 25, 2011 9:47 pm

Re: Mining

Post by ogw677 »

Hey, so I'm having some issues with minning, I have 41 str, and a stone axe q10, I spend all my stamina in the walls of my minehole and what I get is a fuckin' stone , how can I mine other stuff? wat is wrong?
User avatar
min_the_fair
Posts: 485
Joined: Sun Jan 30, 2011 11:45 pm

Re: Mining

Post by min_the_fair »

ogw677 wrote:Hey, so I'm having some issues with minning, I have 41 str, and a stone axe q10, I spend all my stamina in the walls of my minehole and what I get is a fuckin' stone , how can I mine other stuff? wat is wrong?
You get a fuckin' stone because there is no fuckin' ore there. Fuck off and mine somewhere else.

When you mine, any given tile will give you EITHER a stone (which falls on the floor) OR some ore (which goes into your inventory). If a tile is giving stone, the tiles around it probably will, too. Move.

Hardness also comes in nodes. If the rock is too hard to be useful, look elsewhere for some that's softer.
User avatar
Calixtus
Posts: 61
Joined: Thu Jun 16, 2011 5:20 pm
Location: This side of the pond

Re: Mining

Post by Calixtus »

Procne wrote:this zig-zag in upper part of the screen may cause cave-ins. Only the snake in the lower part is safe
I've read lots of threads on zig zag the one thing that confuses me is how do you redirect your route.

Say I have prospected and got a hint of a node 0 deg (using Enders) this is to the top of the screen. Yet zig zag will take you to the top left or top right of screen. Is there a safe way to readjust where you want to head?
BruThoL
Posts: 392
Joined: Tue Feb 15, 2011 11:01 pm

Re: Mining

Post by BruThoL »

Calixtus wrote:
Procne wrote:this zig-zag in upper part of the screen may cause cave-ins. Only the snake in the lower part is safe
I've read lots of threads on zig zag the one thing that confuses me is how do you redirect your route.

Say I have prospected and got a hint of a node 0 deg (using Enders) this is to the top of the screen. Yet zig zag will take you to the top left or top right of screen. Is there a safe way to readjust where you want to head?
I'm not sure the zig zag in the top of screen could cause cave in. I do it a lot and i never had cave-in.

Return to “How do I?”