Generic cave-wall during mining

EnderWiggin · Post by **EnderWiggin** » Mon Oct 19, 2015 9:44 am

I've mined some ore and beneath it found generic cave wall. When I've mined it I've got same ore as nearby tiles and it then turned to ore wall.

jorb · Post by **jorb** » Mon Oct 19, 2015 10:18 am

Hmmm. Hard to deconstruct the situation, but might look at it.

RickyP602 · Post by **RickyP602** » Mon Oct 19, 2015 11:02 am

I've had the same thing happen when exploratory mining. I'll mine a section, the two sections that are visible and adjacent to it will turn to the appropriate tile, but the one behind it will not.

Turtlesir · Post by **Turtlesir** » Mon Oct 19, 2015 11:09 am

had this happen a couple times. after exiting the cave and revisiting they will have turned into the proper stone/ore.

in this case, all mined tiles were iron ochre, the long line of iron ochre you see on the top was all generic cave wall before revisiting. thought it might be because of a natural gallery behind it, but no. walls connecting to the basalt on the right are also all iron ochre, but these were the normal orange colour.

tempwad · Post by **tempwad** » Mon Oct 19, 2015 12:41 pm

it happens when it is border of minimap. other minimap walls shows as undigged until relog or reenter.

Turtlesir · Post by **Turtlesir** » Mon Oct 19, 2015 2:53 pm

ah, that explains why it was such a straight line.

EnderWiggin · Post by **EnderWiggin** » Thu Nov 05, 2015 11:57 am

Jorb, it looks like you've made it worse:

oops.png

Now wall does not disappear at all, but I can walk through it

Generic cave-wall during mining

Generic cave-wall during mining

Re: Generic cave-wall during mining

Re: Generic cave-wall during mining

Re: Generic cave-wall during mining

Re: Generic cave-wall during mining

Re: Generic cave-wall during mining

Re: Generic cave-wall during mining