Amber Client

Forum for alternative clients, mods & discussions on the same.
Mistmonk
Posts: 27
Joined: Fri Dec 02, 2011 5:22 am

Re: Amber Client

Post by Mistmonk »

Hi... never used linux before but heard it was possible to get around the shader error for custom clients so trying to figure it out... this error comes up right now when trying to run the .sh file,

Code: Select all

JNLParseException[ Could not parse launch file. Error at line 1.]
	at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
	at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
	at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
	at com.sun.javaws.Main.launchApp(Unknown Source)
	at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
	at com.sun.javaws.Main.access$000(Unknown Source)
	at com.sun.javaws.Main$1.run(Unknown Source)
	at java.lang.Thread.run(Thread.java:745)
Caused by: org.xml.sax.SAXParseException; lineNumber: 1; columnNumber: 1; Content is not allowed in prolog.
	at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:203)
	at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:177)
	at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:400)
	at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:327)
	at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1437)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:999)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:606)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510)
	at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:848)
	at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:777)
	at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:141)
	at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1213)
	at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:643)
	at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl.parse(SAXParserImpl.java:327)
	at com.sun.deploy.xml.XMLParser.parse(Unknown Source)
	... 8 more
And wrapped exception

Code: Select all

org.xml.sax.SAXParseException; lineNumber: 1; columnNumber: 1; Content is not allowed in prolog.
	at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:203)
	at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:177)
	at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:400)
	at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:327)
	at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1437)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:999)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:606)
	at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510)
	at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:848)
	at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:777)
	at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:141)
	at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1213)
	at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:643)
	at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl.parse(SAXParserImpl.java:327)
	at com.sun.deploy.xml.XMLParser.parse(Unknown Source)
	at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
	at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
	at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
	at com.sun.javaws.Main.launchApp(Unknown Source)
	at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
	at com.sun.javaws.Main.access$000(Unknown Source)
	at com.sun.javaws.Main$1.run(Unknown Source)
	at java.lang.Thread.run(Thread.java:745)
It might be a permissions thing, not sure how to give scripts permission... been trying for a few hours now, but kind of stuck on getting permission to give permission... (thinking about permissions because need to give a different script permission to change mouse settings but can't figure that out either)
Top
User avatar
romovs
Posts: 1472
Joined: Sun Sep 29, 2013 9:26 am
Location: The Tabouret

Re: Amber Client

Post by romovs »

carson330 wrote:So uhh, hows that steel auto-loader coming along? That's a serious game changer if you decide to release that :)
Top priority atm. Just waiting for when we start making steel.
RaidenKoizuma wrote:When it gets to "Building Map" the client just crashes. any fixes?
Run with run-debug.bat and post the error log.
Clemence wrote:A suggestion : the client take some time to open, and I often wonder if I correctly double clicked or not, leading to open 2 windows.
Would be handy to have a pop up saying the client is opening as soon as you open it, saying to wait a bit for the opening.
It probably won't help much to integrate that to the client, the popup will show with the same delay. But you can add this

Code: Select all

msg * Haven and Hearth is loading...
As the first line in run.bat. The only problem is that you'll need to manually close the message box.
carson330 wrote:So uhh, hows that steel auto-loader coming along? That's a serious game changer if you decide to release that :)
No idea, sorry. Check that you have all the relevant options enabled and sound volumes are not set to 0.
Mistmonk wrote:Hi... never used linux before but heard it was possible to get around the shader error for custom clients so trying to figure it out... this error comes up right now when trying to run the .sh file,

Code: Select all

JNLParseException[ Could not parse launch file. Error at line 1.]
	at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
	at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
	at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
	at com.sun.javaws.Main.launchApp(Unknown Source)
	at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
	at com.sun.javaws.Main.access$000(Unknown Source)
	at com.sun.javaws.Main$1.run(Unknown Source)
	at java.lang.Thread.run(Thread.java:745)
Caused by: org.xml.sax.SAXParseException; lineNumber: 1; columnNumber: 1; Content is not allowed in prolog.
Might be an issue with OpenJDK. So if you use that try installing Oracle's JRE (and make sure that its the one being actually invoked from the command line).
Top
Mistmonk
Posts: 27
Joined: Fri Dec 02, 2011 5:22 am

Re: Amber Client

Post by Mistmonk »

romovs wrote:Might be an issue with OpenJDK. So if you use that try installing Oracle's JRE (and make sure that its the one being actually invoked from the command line).
Um, think it is now?...

java version "1.8.0_73"
Java(TM) SE Runtime Environment (build 1.8.0_73-b02)
Java HotSpot(TM) 64-Bit Server VM (build 25.73-b02, mixed mode)


where previously it was
java version "1.7.0_95"
OpenJDK Runtime Environment (IcedTea 2.6.4) (7u95-2.6.4-0ubuntu0.15.10.1)
OpenJDK 64-Bit Server VM (build 24.95-b01, mixed mode)


But still getting the same error :d


Edit: Oh, got the mouse script to work by just typing "sh filename" in terminal, it still doesn't work if I click it from the desktop :/ buuut... when trying to do the same with run.sh, it says "Error: Unable to access jarfile hafen.jar" which is right there in the same folder o,o
Last edited by Mistmonk on Mon Feb 29, 2016 10:24 pm, edited 1 time in total.
Top
User avatar
romovs
Posts: 1472
Joined: Sun Sep 29, 2013 9:26 am
Location: The Tabouret

Re: Amber Client

Post by romovs »

Try removing ~/.java/.userPrefs folder, maybe settings file got corrupted.
Top
Mistmonk
Posts: 27
Joined: Fri Dec 02, 2011 5:22 am

Re: Amber Client

Post by Mistmonk »

romovs wrote:Try removing ~/.java/.userPrefs folder, maybe settings file got corrupted.
... can't find that anywhere :lol:
Why do I always post seconds before finding out how to do something? stupid hidden files being hidden D:


Anyway, now it acts like it's loading something when clicking run.sh, but nothing happens. sh run.sh in terminal still gives Error: Unable to access jarfile hafen.jar



Edit-again: Omg I got it to work, I had to change hafen.jar to the full filepath in run.sh. Idk why lol. Thanks! Finally can play with all the extra goodies :D
Top
AHaPXuCT
Posts: 1
Joined: Mon Nov 08, 2010 1:44 pm

Re: Amber Client

Post by AHaPXuCT »

plz help me! )
My log when you run from any custom client
Image
Top
User avatar
romovs
Posts: 1472
Joined: Sun Sep 29, 2013 9:26 am
Location: The Tabouret

Re: Amber Client

Post by romovs »

AHaPXuCT wrote:plz help me! )
My log when you run from any custom client
img
I have a suspicion that somehow default client when invoked through JNLP loads a different set of video drivers than the custom clients or maybe uses different java installation.

If you have both discrete and integrating GPU, check the management utility for you video card, there should be a place where you can assign specific GPU to applications (java).
Perhaps updating video drivers directly from the vendor site instead of Windows update would help.
But don't know really, all that are just theories...
Top
User avatar
Turtlesir
Posts: 813
Joined: Fri Aug 28, 2015 3:55 pm
Location: five levels under the sea

Re: Amber Client

Post by Turtlesir »

is there something wrong with center planting? my char plants one tile south of the one i clicked.
Top
User avatar
Clemence
Posts: 447
Joined: Sat Mar 19, 2011 5:26 am

Re: Amber Client

Post by Clemence »

romovs wrote:
Clemence wrote:A suggestion : the client take some time to open, and I often wonder if I correctly double clicked or not, leading to open 2 windows.
Would be handy to have a pop up saying the client is opening as soon as you open it, saying to wait a bit for the opening.
It probably won't help much to integrate that to the client, the popup will show with the same delay. But you can add this

Code: Select all

msg * Haven and Hearth is loading...
As the first line in run.bat. The only problem is that you'll need to manually close the message box.
Thanks, and I dont even have to close it manually, I just see a box flashing thats percfect thx.
Top
User avatar
romovs
Posts: 1472
Joined: Sun Sep 29, 2013 9:26 am
Location: The Tabouret

Re: Amber Client

Post by romovs »

Turtlesir wrote:is there something wrong with center planting? my char plants one tile south of the one i clicked.
Yes, haven't found why yet.
Top

Return to “The Wizards' Tower”