in making brick walls.

Persius · Post by **Persius** » Thu Aug 18, 2011 6:04 am

I have a newb question..i could find out for myself but knowing its real hard to bring down brick walls...but be better off asking.

1.Do we make 2 initial post to make the gate?
OR
2.Do I make just another corner post to connect to the initial post and make the gate
OR
3. Do i have make a wall and then make the gate.

I just need this sure so i wont mess up my newb brickwall.

TY
Persius

Post by **TeckXKnight** » Thu Aug 18, 2011 6:13 am

It's just like working with a palisade or a roundpole fence. Are you familiar with working with either of those?

Persius · Post by **Persius** » Thu Aug 18, 2011 6:15 am

with the palisade..what i did was make 2 initial posts to make the gate...it was a pain...but if i do the same thing with the brickwall..it is ok...but hopefully..there is another method that still works the same.,..getting a gate.

so..does no. 3 works?

Post by **TeckXKnight** » Thu Aug 18, 2011 6:27 am

You can just make a giant square and expand cornerposts rather than building a second one. If that's what #3 means then yes.

Persius · Post by **Persius** » Thu Aug 18, 2011 6:32 am

TeckXKnight wrote:You can just make a giant square and expand cornerposts rather than building a second one. If that's what #3 means then yes.

well..i have started my initial post at one corner and then made my way making a square..now to connected the square and make the gate, do i just make a wall section then gate or do i make a middle post to connect for the gate?

Post by **TeckXKnight** » Thu Aug 18, 2011 6:45 am

I'm having a lot of trouble understanding what you mean, I apologize. I'll just explain the full process.

To make a gate you need 2 cornerposts exactly 2 tiles from eachother. It doesn't matter if they're built from scratch or expanded. It does not work if they're 2.1 tiles from eachother or 1.9 tiles from eachother. You need to pave the 2 tiles infront of and behind the area you're planning to build the gate as well. Even if one of the cornerposts is sealed you can build the gate as long as the second one is not.

Persius · Post by **Persius** » Thu Aug 18, 2011 6:50 am

ok...got it..thank you for your time knight.

so 2 post with 2 tiles gap to make gate...ty

Post by **MagicManICT** » Thu Aug 18, 2011 2:39 pm

TeckXKnight wrote: You need to pave the 2 tiles infront of and behind the area you're planning to build the gate as well.

Didn't this get changed so you only need one side paved, or am I just smoking some bad juju? (I can never remember which side as it's just as easy to pave the front and back.)

Post by **TeckXKnight** » Thu Aug 18, 2011 3:00 pm

Did it get changed? I'll be honest and say that I've never tried to just pave one side.

Procne · Post by **Procne** » Thu Aug 18, 2011 3:05 pm

When building palisade gate I have never paved any side of the gate, only the 2 tiles that the gate was on.

in making brick walls.

in making brick walls.

Re: in making brick walls.

Re: in making brick walls.

Re: in making brick walls.

Re: in making brick walls.

Re: in making brick walls.

Re: in making brick walls.

Re: in making brick walls.

Re: in making brick walls.

Re: in making brick walls.