kiln mixed load firing time

[tweinst]

I loaded up a kiln with two unfired urns and filled the extra space with clay blocks for brick. I added one tar stick, which seemed to give me about four blocks worth of fuel from the fuel bar, then I lit it. Partway through the bricks were done, so I took them out and loaded up more clay blocks, but i left the urns undisturbed. When I came back later after it had burned out, the urns were only about 2/3 done. From the fuel bar, I'd have thought there was plenty of fuel, so I suspect the firing time for the urns may have gotten reset by either taking out the finished bricks or loading up fresh blocks. Is this intended?

[jorb]

Urns need to be fired for a pretty long time. Significantly longer than bricks. Not a bug. Locking.