Tanning tub bug

[Recon]

Tanning tubes stucked at 92-95% after i teleport with them to hearthfire and move it to my house.

Few of them finishes, but one still looping in 92-95%.

[ElGato]

Tanning tubes stucked at 92-95% after i teleport with them to hearthfire and move it to my house.

Few of them finishes, but one still looping in 92-95%.

Stop putting the tub in a boat/cart and it won't go back to 92%.
If you aren't then you need to explain more about the "bug" so it can be fixed.

[Recon]

No, It is not cart exploit.
I have built 9 tubs, 8 of them if filled with bark/water/fur, then i lift it and travel to hearthfire.
After some time i was check progress and see 92%, few minutes after it was 93% etc.
Then i went to explore map. When i was come back status was 92% again, that repeats few times.
I drag one tub outside, but it was no effect. Tried to reset by pull out fur, progress sets to 0%,
then i put it back. Progress proceed to 5%. I've returned to exploring map, but when i come back
it was 92%.

[DeadlyPencil]

i think i remember someone responding to a post like this saying that it is probably caused do to a lack of either water or bark.... can you check that your water is full and so is your bark? and i dont know if that was the fix because i destinctly remember the guy never comming back to post if it fixed the problem or not.

[Machenoid]

When the server restarts after an update the players' tanning tubs are set to 92% and continue to function. If this is the case the tanning tub will work normally. In the early days of H&H carts would bump the tanning tubs placed inside it to 92% because of frequent server crashes/restarts (at least that's what i remember) so the behaviour you're experiencing is probably a leftover from that time that got triggered somehow. The simple solution is to the bugged tanning tub is to remove your skin from the tub, and destroy/ignore using the tub and make a new one, and remember to never ever move it with a method other then walking it when there's a skin inside of it.

Tub with skin inside = Lift/walking is safe, everything else is not. (carts, boats, traveling, etc)
Tub with no skin inside = Move as you want, in boats, carts, or traveling, it will not be bugged.

[DeadlyPencil]

K this is how my i got the OP's bug to occur and how I fixed it...

2 tanning tubs were filled with water, and bark, they were then put into a boat and teleported back to the hearth fire. boat was put down and hides were put into it. The tubs with hides were then put back into the boat for the boat bug to bring it to 92% complete. it never went past 95% complete. New bark was then put into the tanning tub although the tub already showed 100% bark. The process completed and i got my leather.

what i believed happen was when the tubs were put into the boat to teleport back to the base, it was set to 92% even though nothing was in it. by then putting the hide in it. it didn't have enough bark left. even though it showed 100%. so thats why it never goes past 95%. least thats my theory.


so ya. moral of the story. put more bark in. and dont post a bug report if your not gonna check back on it. my suggestion to you would have worked for you. but your just like the other guy who never came back to the last thread that was made about this.

[Recon]

I was tried to test this tubs few times, but someone steal fur from them.
As i say, i have 8 bugged tubs of 9, i filled last one "pure" tub with water/bark,
lift it, bring under claim, and place fur in. After one hour i find leather in it.

[Zirikana]

interesting.... I had been using a cart to transport four tubs back and forth from my settlement to the nearby river, and never had a problem with it. I would take the tubs out and set them on the pavement to do their thing once they were filled up. Then I decided to stick them all under a lean-to overnight to hide them (some jerk's been stealing my leather). The leather didn't progess at all in that time, and when i pulled the tubs out this morning and set them on the ground again, after a while they all stalled out at 93%. So, I pulled the furs out of the tubs and put them right back in, which reset the progress timer to zero. Didn't have to refill water or bark at all. They tanned just fine after that.

Hopefully that helps a bit with diagnosing this bug/issue!

[danath]

I always fill the the bark bar, and putting the tubes in boat/cart autorepairs them

[Peter]

I've got this happening to me, and I think that the area containing the tubs may be unloading, causing them to reset to 92%. When I logged on into my house and checked out my tubs, they where at 92% and proceeding normally.

I then left my home and went a ways out to scrounge. When I returned, they reset again, and since I had been away for at least half an hour and I know that no other hearthling had been about, I suspect that the region (or at least the interior of my house) simply unloaded.

Anyone else notice camp fires reseting if left alone, possibly the same issue?