mine hole building

Ask, answer and discuss any and all topics about the hows, whys, wheres and whens of playing Haven & Hearth.
JohnBoyFarmer
Posts: 4
Joined: Sun Aug 28, 2022 11:05 pm

mine hole building

Post by JohnBoyFarmer »

Getting "The rock below is to hard for you to mine" while trying to place a mine hole.
I have heard that the rock varies in hardness from place to place but is there anyone that has figure out what the averages are for each level, and what Strength is roughly required to drop the mine hole?
And either the pickaxe does not factor in while trying to place the mine hole itself or the rock below me is very damn hard cause i just upped my pickaxe Q by 80Pts and it had no effect on letting me place the hole.
Grobble
Posts: 88
Joined: Sat Feb 10, 2018 11:44 pm

Re: mine hole building

Post by Grobble »

I'm at 151 STR and trying to get to level 3. Pickaxe or not it still says too hard.
User avatar
lordgrunt
Posts: 459
Joined: Sat Nov 05, 2011 11:49 pm

Re: mine hole building

Post by lordgrunt »

imagine hardeness nodes being almost the same as quality nodes for stones. they can take big shapes and as quality nodes, they can go up by hundreds of percents above level average. also, there are generally weak rocks (alabaster) and the opposite (like quartz, korund).
also, chances are that when you finally eat enough str to finally break down a level, you'll be trapped or surrounded by 1% per hit rocks
Miss_Min
Posts: 175
Joined: Sun Mar 25, 2012 11:28 am

Re: mine hole building

Post by Miss_Min »

I have about 150 str and can mine at least half of L3 with a q120 stone axe. Try building your minehole over a cave so that you can run around testing walls (if you can't find a cave on L3, sorry!)

(if you can get to Whatever Bay market, check what's available for sale - sometimes a stone axe is Way Expensive but you can buy a high q stone and branch separately for 1 coin each, so long as your stats aren't going to cap it too badly).

Return to “How do I?”