Strength for lvl 2 mine

Narski · Post by **Narski** » Sun Mar 03, 2019 7:43 am

whats some good stats and pick axe q to mine level 2 efficiently ?

Uriel · Post by **Uriel** » Sun Mar 03, 2019 8:08 am

Narski wrote:whats some good stats and pick axe q to mine level 2 efficiently ?

Its random

Post by **MagicManICT** » Sun Mar 03, 2019 12:20 pm

You can find spots you don't need much, but I'd suggest minimum 50 and q30 tool. Either eat for it, or raise via gilds and credos (Quarryman, miner)

Winnfield · Post by **Winnfield** » Sun Mar 03, 2019 5:12 pm

MagicManICT wrote:You can find spots you don't need much, but I'd suggest minimum 50 and q30 tool. Either eat for it, or raise via gilds and credos (Quarryman, miner)

I know I’m kinda hijacking this thread but how about level 6?

kirion · Post by **kirion** » Sun Mar 03, 2019 6:49 pm

I started mining at lvl 2 with a strength of about 60 and a pickaxe q12, but it was tough. Upgrading the pickaxe to 20+ made it MUCH easier.

Sevenless · Post by **Sevenless** » Mon Mar 04, 2019 3:46 am

Winnfield wrote:
MagicManICT wrote:You can find spots you don't need much, but I'd suggest minimum 50 and q30 tool. Either eat for it, or raise via gilds and credos (Quarryman, miner)
I know I’m kinda hijacking this thread but how about level 6?

I know there's a good degree of randomness, but if you're not rocking Q60 pick and 150 after gild str you're probably out of luck on L6. Beyond that rock type and hardness node really matter so it's difficult to say.

Good news is that when you try to drop a minehole on a spot you can't mine it won't let you.

Hrenli · Post by **Hrenli** » Mon Mar 04, 2019 11:05 am

Sevenless wrote:if you're not rocking Q60 pick and 150 after gild str you're probably out of luck on L6.

Have not tried L6 yet personally, but there are spots even on L3 which might be challenging (up to unminable) with stats like these...

Vigilance · Post by **Vigilance** » Mon Mar 04, 2019 11:11 am

I'm rolling 268 str and 66 ql pick and I definitely can't mine the majority of my L4, can hardly touch my L5, and can only place the minehole in a couple spots to go to 6.

This is a fun thread.

Winnfield · Post by **Winnfield** » Mon Mar 04, 2019 5:32 pm

Vigilance wrote:I'm rolling 268 str and 66 ql pick and I definitely can't mine the majority of my L4, can hardly touch my L5, and can only place the minehole in a couple spots to go to 6.

This is a fun thread.

Yeah same for us, somewhat annoying because we havent found any really decent nodes on upper floors but level 6 seems to be rolling in them, actually finding mineable spots though is a challenge.

Miss_Min · Post by **Miss_Min** » Sun Mar 10, 2019 7:05 pm

Sevenless wrote:Good news is that when you try to drop a minehole on a spot you can't mine it won't let you.

Yeah, I've just encountered this. Has anyone worked out yet, if it refers to the 2*2 area of the actual minehole, or to the whole of the area opened up on the lower level?

Basically I don't want to drop the hole smack into the ore (which I can mine), and also don't want to have to mine out the entire cave wall to place it either.

Strength for lvl 2 mine

Strength for lvl 2 mine

Re: Strength for lvl 2 mine

Re: Strength for lvl 2 mine

Re: Strength for lvl 2 mine

Re: Strength for lvl 2 mine

Re: Strength for lvl 2 mine

Re: Strength for lvl 2 mine

Re: Strength for lvl 2 mine

Re: Strength for lvl 2 mine

Re: Strength for lvl 2 mine