How much fuel?!! (steel)

Ask, answer and discuss any and all topics about the hows, whys, wheres and whens of playing Haven & Hearth.
User avatar
Mateusz_Zboj
Posts: 760
Joined: Sun Jul 03, 2011 8:03 pm

How much fuel?!! (steel)

Post by Mateusz_Zboj »

So i calculated that i would need around 300 freaking boards to fill up a crucible to make me single bar of steel.
So is it real?
User avatar
TeckXKnight
Posts: 8274
Joined: Tue Jul 13, 2010 2:31 am
Location: How Do I?

Re: How much fuel?!! (steel)

Post by TeckXKnight »

What? No.
You need 2 charcoal for the steel and then like 32 more to fuel one crucible. That comes out to 17 boards altogether. Where did you get 300 from?
User avatar
Mateusz_Zboj
Posts: 760
Joined: Sun Jul 03, 2011 8:03 pm

Re: How much fuel?!! (steel)

Post by Mateusz_Zboj »

charcoal for 2 ticks. 12 ticks for one hour

52 hours = 672 ticks
336 coal
User avatar
TeckXKnight
Posts: 8274
Joined: Tue Jul 13, 2010 2:31 am
Location: How Do I?

Re: How much fuel?!! (steel)

Post by TeckXKnight »

I know for a fact it does not take upwards of 5 cupboards of charcoal to make a single bar of steel, that'd be crazy.
User avatar
Mateusz_Zboj
Posts: 760
Joined: Sun Jul 03, 2011 8:03 pm

Re: How much fuel?!! (steel)

Post by Mateusz_Zboj »

So coal is def more than 2 ticks for steel crucible?
Silvertron
Posts: 72
Joined: Mon Jan 02, 2012 8:32 pm

Re: How much fuel?!! (steel)

Post by Silvertron »

1 tick in the crucible is 40 minutes, so it's not 12 ticks for one hour.

There were a few calculations floating around on how much fuel is needed for steel exactly... right at the top of this page in the frequently asked questions thread for example (charcoal, branches and blocks):
viewtopic.php?f=2&t=22391&start=2240
User avatar
Mateusz_Zboj
Posts: 760
Joined: Sun Jul 03, 2011 8:03 pm

Re: How much fuel?!! (steel)

Post by Mateusz_Zboj »

Ok, thanks for help then. So it seems that buying wrought and selling steel seems good business.
User avatar
ApocalypsePlease
Posts: 1164
Joined: Mon Jun 27, 2011 12:52 am

Re: How much fuel?!! (steel)

Post by ApocalypsePlease »

Steel runs off different length ticks from all other "burners"
All the info on the times and fuel needed are outlined in the post of mine Silvertron linked.
Inactive
User avatar
ArtemisGray
Posts: 287
Joined: Sat Mar 17, 2012 3:07 am
Location: New Zealand

Re: How much fuel?!! (steel)

Post by ArtemisGray »

"Quality of steel will not be higher than quality of wrought iron, no matter what quality charcoal, fuel and crucible is used. Although it is possible that the quality may be lowered by them if wrought iron is of higher quality - verification needed. "

Quote from the wiki, when it says fuel. Does it mean the two pieces of charcoal placed into the crucible?

Because... do people really use hundreds of pieces of good Q charcoal to fuel their crucibles for a couple bits of good steel?
Image
Silvertron
Posts: 72
Joined: Mon Jan 02, 2012 8:32 pm

Re: How much fuel?!! (steel)

Post by Silvertron »

As far as I can tell it means either/both. I've made steel with same q wrought and charcoal, fueled with lower q blocks, and got lower q steel.
I'd also guess most people use nice q blocks as fuel to make their nice q steel, not charcoal, which isn't so tough really, given how common q100+ trees (and thus sale of q100+ tree seeds) are by now.

Return to “How do I?”