So i calculated that i would need around 300 freaking boards to fill up a crucible to make me single bar of steel.
So is it real?
-
TeckXKnight
- Posts: 8274
- Joined: Tue Jul 13, 2010 2:31 am
- Location: How Do I?
Re: How much fuel?!! (steel)
What? No.
You need 2 charcoal for the steel and then like 32 more to fuel one crucible. That comes out to 17 boards altogether. Where did you get 300 from?
You need 2 charcoal for the steel and then like 32 more to fuel one crucible. That comes out to 17 boards altogether. Where did you get 300 from?
-
Mateusz_Zboj
- Posts: 760
- Joined: Sun Jul 03, 2011 8:03 pm
Re: How much fuel?!! (steel)
charcoal for 2 ticks. 12 ticks for one hour
52 hours = 672 ticks
336 coal
52 hours = 672 ticks
336 coal
-
TeckXKnight
- Posts: 8274
- Joined: Tue Jul 13, 2010 2:31 am
- Location: How Do I?
Re: How much fuel?!! (steel)
I know for a fact it does not take upwards of 5 cupboards of charcoal to make a single bar of steel, that'd be crazy.
-
Mateusz_Zboj
- Posts: 760
- Joined: Sun Jul 03, 2011 8:03 pm
Re: How much fuel?!! (steel)
So coal is def more than 2 ticks for steel crucible?
-
Silvertron
- Posts: 72
- Joined: Mon Jan 02, 2012 8:32 pm
Re: How much fuel?!! (steel)
1 tick in the crucible is 40 minutes, so it's not 12 ticks for one hour.
There were a few calculations floating around on how much fuel is needed for steel exactly... right at the top of this page in the frequently asked questions thread for example (charcoal, branches and blocks):
viewtopic.php?f=2&t=22391&start=2240
There were a few calculations floating around on how much fuel is needed for steel exactly... right at the top of this page in the frequently asked questions thread for example (charcoal, branches and blocks):
viewtopic.php?f=2&t=22391&start=2240
-
Mateusz_Zboj
- Posts: 760
- Joined: Sun Jul 03, 2011 8:03 pm
Re: How much fuel?!! (steel)
Ok, thanks for help then. So it seems that buying wrought and selling steel seems good business.
-
ApocalypsePlease
- Posts: 1164
- Joined: Mon Jun 27, 2011 12:52 am
Re: How much fuel?!! (steel)
Steel runs off different length ticks from all other "burners"
All the info on the times and fuel needed are outlined in the post of mine Silvertron linked.
All the info on the times and fuel needed are outlined in the post of mine Silvertron linked.
Inactive
-
ArtemisGray
- Posts: 287
- Joined: Sat Mar 17, 2012 3:07 am
- Location: New Zealand
Re: How much fuel?!! (steel)
"Quality of steel will not be higher than quality of wrought iron, no matter what quality charcoal, fuel and crucible is used. Although it is possible that the quality may be lowered by them if wrought iron is of higher quality - verification needed. "
Quote from the wiki, when it says fuel. Does it mean the two pieces of charcoal placed into the crucible?
Because... do people really use hundreds of pieces of good Q charcoal to fuel their crucibles for a couple bits of good steel?
Quote from the wiki, when it says fuel. Does it mean the two pieces of charcoal placed into the crucible?
Because... do people really use hundreds of pieces of good Q charcoal to fuel their crucibles for a couple bits of good steel?

-
Silvertron
- Posts: 72
- Joined: Mon Jan 02, 2012 8:32 pm
Re: How much fuel?!! (steel)
As far as I can tell it means either/both. I've made steel with same q wrought and charcoal, fueled with lower q blocks, and got lower q steel.
I'd also guess most people use nice q blocks as fuel to make their nice q steel, not charcoal, which isn't so tough really, given how common q100+ trees (and thus sale of q100+ tree seeds) are by now.
I'd also guess most people use nice q blocks as fuel to make their nice q steel, not charcoal, which isn't so tough really, given how common q100+ trees (and thus sale of q100+ tree seeds) are by now.